Services

Print
Bookmark
Share on
Facebook Twitter Linkedin
Contact us

Rules for packing steel sheets

Site Krakow
Material coated metal (zinc, Aluzinc-coated sheet, aluminum) cold-rolled
Surface pickled, oiled
Thickness 0.6 mm – 3 mm

A - Stacked sheets

B - Palette

a) longitudinal (upper) bar: length = length of the sheet; (W x H) - 80 mm x 80 mm capacity - 4
b) lateral (bottom) beam: length = width of the sheet; (W x H) - 80 mm x 60 m
quantity:

 
3 -
the length to 2499 mm sheets
4 - the length of the sheets from 2500 mm to 3499 mm
5 - for a length of 3500 mm sheets

 
C -
Tape binding machines - plastic tape, dimensions: 19 mm x 1 mm, number of cross-links: 1 per longitudinal beam, number of bonds : 2

D - Film - clear with a thickness of 0.061 mm to 0.1 mm. Pack protected foil from the top and the side.
 
E - Angles - to protect the upper edges of the pack located at each bond


Site Bytom
Material coated metal (zinc, Aluzinc-coated sheet, aluminum) cold-rolled
Surface pickled, oiled 
Thickness 0.4 - 3 mm

A - Edge beams: pine wood, with dimensions
80 x 80 mm or 80 x 60 mm (see description length);
The number of the beams depends on the pallet width
and length
(see description: length and width). Optionally,
the upper beams can be covered with cardboard.
 
B - Pad: made of cardboard, placed under each
clamp, if the clamp is an angle, the pad is not used.
 
C - Angle: made of steel strip
0.4 - 1 mm, length min. 300 mm.
 
D - Binding tape: the number of tapes depends on the sheet/blank length (see description: length and width).
 
E - Clamp
 
F - Length: depending on the sheet/blank length the pallet is:
* up to 800 mm  long - 2 lower beams, 2 binding tapes
* from 801 to 2000 mm long - 3 lower beams, 3 binding tapes
* from 2001 to 5000 mm long - 4 lower beams, 5 binding tapes

Note
: If the sheet/blank length is larger than 3500 mm,
the upper beams are cross-section 100 x 80 mm.

 
G - Width: depending on the sheet/blank length the pallet consists of:
* up to 800 mm - 2 upper beams, 2 binding tapes
* from 801 to 1200 mm - 3 upper beams, 2 tape binding machines
* 1201 to 1600 mm - 4 upper squares, 2 binding tapes

 
Note: if the sheets/blanks are 0.8 mm thick, the number of the upper
beams is larger:
* up to 800 mm - 3 upper beams
* from 801 to 1200 mm - 4 upper beams
* from 1201 to 1600 mm - 4 upper beams.


Packaging code  Sheet/blank width
 [mm]

F02 100 – 200 D2  100-200
F03 201 – 300 D2  201-300
F04 301 – 400 D2  301-400
F05 401 – 500 D2  401-500
F06 501 – 750 D2  501-750
F07 751 – 1000 D2  751-1000
F08 1001 – 1250 D2  1001-1250
F09 1251 – 1500 D2  1251-1500
F09 1501 – wiÄ™cej D2  1500-
ZPUE10 1000x2000  1000x2000
ZPUE11 1250x2000  1250x2000
ZPUE12 1250x2500  1250x2500
ZPUE15 1500x3000  1500x3000
ZPUE43 1243.6x2043.6  1243.6x2043.6

Top of page
Back