Support

Print
Bookmark
Share on
Facebook Twitter
Contact us

Calculation of tubes

Data to be introduced
External diameter
(mm)
Wall thickness
(mm)
Length
(m)
Number of
tubes
Steel grade
Results of calculation
Moment of inertia
(cm4)
Section modulus
(cm3)
Weight
(tons)
Bending moment*
(kNm)
 

* Bending moment = elastic section modulus [m3] × minimum yield strength [kN/m2] (without safety factor)


Calculation combined wall

Data to be introduced
Tubular piles Intermediate piles
External
diameter
(mm)
Wall
thickness
(mm)
Length
(m)
Steel grade Profile Length
(m)
Results for combined wall
System
width
(mm)
Moment of
inertia
(cm4/m)
Section
modulus
(cm3/m)
System
weight*
(kg/m2)
EI
(kNm2/m)
Bending
moment
(kNm/m)
 

With:

  • EI = bending stiffness = modulus of elasticity [kN/m2] × moment of inertia [m4/m]
  • System width = external diameter [mm] + width sheet piles [mm] + 50 mm
  • System weight = (weight pipe [kg/m] + weight sheet pile [kg/m] × length sheet pile / length tube) / systeem width [m]
    *weight of interlocks on tubes not included
  • Bending moment = elastic section modulus [m3/m] × minimum yield strength [kN/m2] (without safety factor)

Remark:
The decimal symbol of the input can be a point or a comma. The decimal symbol of the output is a point.
The use of digit grouping symbols is not allowed .