Get the new ArcelorMittal Projects app

for your smartphone or tablet now.

Products

Print
Bookmark
Share on
Facebook Twitter Linkedin
Contact us

Steel grades - Sheet piles

Hot rolled sections - EN 10248-1

AZ, AU, PU, GU, AS and HZM sections are delivered in the steel grades based on EN 10248-1 mentioned below. GU sections are available up to S 320 GP. Other steel grades can be delivered on request.

Standard referred to: 

EN 10248-1:1995

Comparable international

standards

Steel
grade
Minimum yield strength ReH Minimum tensile strength Rm

Minimum elongation

USA Canada Japan
N/mm2 N/mm2 % ASTM CSA
G 4021
JIS
A 5528
S 240 GP 240 340 26      
S 270 GP 270 410 24 A 328 Gr. 260 W  
S 320 GP 320 440 23   Gr. 300 W  
S 355 GP 355 480 22 A 572 Gr. 50; A 690  Gr. 350 W  
S 390 GP 390 490 20 A 572 Gr. 55   SY 390
S 430 GP 430 510 19 A 572 Gr. 60 Gr. 400 W  
ArcelorMittal Mill Specification  
S 460 AP 460 550 17 A 572 Gr. 65    

Grades S 460 AP, A 690 and A 572 Gr. 65 on request.



Hot rolled sections: AMLoCor
Mechanical properties and chemical composition
AMLoCor Minimum
yield
strength ReH
Minimum
tensile
strength Rm
Minimum
elongation
Chemical composition (weight % max)
N/mm2 N/mm2 % C Mn Si P S N Cr Al
Blue 320 320 440 23 0.27 1.70 0.60 0.05 0.05 0.011 1.50 0.65
Blue 355 355 480 22 0.27 1.70 0.60 0.05 0.05 0.011 1.50 0.65
Blue 390 390 490 20 0.27 1.70 0.60 0.05 0.05 0.011 1.50 0.65

Some sheet pile sections are not available in AMLoCor steel grade. Click here for more information (PDF, 184 :kB).



Cold formed sections

Mechanical properties according to EN 10249-1:1995 and corresponding former national standards. Other steel grades can be delivered on request.

Standard referred to: EN 10249-1:1995 Former references
Steel
grade
Minimum yield
strength ReH
Minimum Tensile
strength Rm
Minimum elongation
F D GB B
N/mm2 N/mm2 %
S 235 JRC 235 340-470 26 E 24-2 St 37.2 40 B AE 235-B
S 275 JRC 275 410-560 22 E 28-2 St 44.2 43 B AE 275-B
S 355 JOC 355 490-630 22 E 36-3 St 52.3 U 50 C AE 355-C

The in JRC and J0C stands for cold forming aptitude according to EN 10025:1993.