Product Selector

Share on
Facebook Twitter Linkedin
Contact us

ST® Evolution 500/600/900

The linear design of ST® Evolution product range increases our perception of space thanks to a length of profiles which can reach up to 6 meters

  • Standard widths (500-600-900 mm) or specific width on demand, ST Evolution combines flatness and modularity
  • The system with invisible fixing provide attractive lines in the façade
  • The modules E2 of the ST range are bent steel profiles in pre-coated steel, stainless steel or aluminium
  • Evolution = reinforced cladding with an synthetic material and an additional sheet of 5/10 mm thickness factory bonded

  • Length according to product up to 6 m
  • Gauge: 
    Stainless:  1 to 1,5 mm + Evolution
    Aluminium: 1,5 to 2,0 mm + Evolution
    Pre-coating + Krystal: 1 to 1,5 mm + Evolution
  • Standards widths: 500-600-900 mm
  • Others widths on demand
  • With or without closed edges, the closed edges offer a neat finish as for a steel cassette
  • Hollow joints between slats are possible (JCB et JCD)
  • Different interconnection geometries (H, V, HZ, JCB, JCD)
  • Validation by technical services

ST® Evolution, Millenium M, Boujama Architects


Construction Advice ST® Evolution 500/600/900

The use of these systems requires as a preliminary layout taking into account the building dimensions, the openings and eventually the dilations joints
The perfect alignment of the sub-framing is essential in order to obtain a uniform smooth facade. In general, fixings are not visible
The installation should be carried out according to good practice
The cladding can be installed directly on the load-bearing structure or as the external rainscreen cladding fixed  onto liner trays that connected to the main framework and provided with insulation and a sub-framing